UPVC Window Handle Replacement

Replacing a damaged or broken window handle is a relatively easy task and with the right tools it can be done quite quickly. But it’s essential to know the type of handle and the spindle’s length prior to purchasing the replacement.

Older uPVC windows feature handles with cockspurs, which have spurs that protrude to the lock of a wedge cockspur striker plate. These can be either right or left-handed and have to be replaced with the same handle.

What type of lock and UPVC Window Handle Replacement handle do I have?

There are many different types of window handles made from upvc and locks, each having their distinct advantages and functions. The type of handle you have will determine if the locking mechanism you have is effective and if it is easy to open the windows. With time and regular usage, the window handles made of upvc are prone to wear or damage. out, making them less secure and efficient. In some cases they might even be completely removed. If you notice that your upvc window handles have fallen off, it is important to repair them as quickly as possible. This will help stop potential burglaries and keep your home safe.

It is a good thing that replacing your window handles made of upvc is a relatively simple task that can be done by almost anyone. With just a few tools and the right knowledge it’s a straightforward procedure that should take no less than a few minutes. It is important to be aware of the type of lock or handle you have on your window. This will allow you to choose the right replacement.

Inline Espagnolette Handles

They are typically located on the side of the window. They are flat and come with an opening that engages the locking mechanism of the window frame. Inline upvc handles feature a spindle running through the middle of the handle to the window frame in order to operate the latch.

Cockspur Handles

They are typically found on older uPVC window frames and have distinct hook-shaped designs. Cockspur handles have a single screw that secures the handle to the frame and aren’t as secure as other kinds of window handles.

Tilt and Turn Handles

Unlike the other upvc handles that are tilt and turn, these handles can both be rotated to open the windows and tilted inwards for ventilation. They feature a 7mm spindle in the back and are available both in left and right-handed versions.

It is essential to know the spindle size when buying new upvc handles. Not all are exactly the same size. To test the length of your upvc handle, simply drop something in the middle of the hole, and then measure the distance it travels before it comes into contact with an obstruction. This is the longest spindle length that will fit your window.

What is the spindle?

uPVC window handles work similarly as doors, with the user turning the handle to activate a latch inside the frame. The window then opens and shut. However, sometimes these handles can become damaged, particularly if they are regularly used or exposed to harsh weather conditions. This can lead to the need to replace your uPVC handles on windows since they might not be able to operate the window in a proper manner for a long time.

There are many types of uPVC handle options, such as Espag, Cockspur, and Spaded handles. They are designed in a variety ways to fit into uPVC frames. Each handle type utilizes an entirely different spindle for locking the window mechanism. It is essential to determine the type of handle installed on your uPVC windows so that you can replace it with the correct one.

The base of the handle will inform the type of uPVC it is. A snap-in covers should be over the screw that holds the handle’s base in place. When you remove this cover and you’ll be able to observe the second screw that holds the base of the handle in position. After both screws have been removed, you should be able remove the handle from the uPVC.

After you have removed the uPVC handle, carefully remove it from the locking mechanism. Take note of the length of the spindle. You will need to purchase a replacement handles for upvc windows with the same length as the handle that was originally used and the locking device.

The spindle wears out and is unable to operate the locking mechanism. This could be due wear and tear from continuous use or loosening of the locking mechanism or even rust over time. When this happens it is required to replace the window handle and locking mechanism to restore the full functionality to your uPVC windows.

How do I take off the handle that was previously attached?

Over time and through everyday use, window handles can become damaged or broken and if this happens, it is crucial to repair them as quickly as possible to ensure the security of your home. Fortunately, replacing a worn or damaged handle is a fairly simple task that can be carried out in just over an hour and doesn’t require any special tools.

The first step to remove the handle that was previously used is to remove the screw located on the top of the handle base. Once the screw is removed, the handle will be removed. A second screw will be located at the base of the handle. This too can be removed. Once the two screws are removed, the handle will be removed from the base of the window.

After removing the old handle, align the fixing holes of the new handle to the existing holes in the window frame. If there is a sticker or cap on the new handle, remove it if needed and put the handle back in place. Once the handle is set, it is crucial to verify that it works by turning the handle, and ensuring that the lock mechanism is activated.

Espag handles have spindles that protrude from the handle and slot into the multipoint locking mechanism that is on the frame of the window. Cadenza windows feature a blade with cutouts that fit into the lock mechanism. Cockspur handles are long and hook over the frame of the window or the transom bar crossmember.

Once you have the new handle in place, insert the spindle inside the lock inside the window and then tighten it. Once the handle is securely fixed then replace the snap-in cover and the screw cap (if necessary). The handle is now ready to use to use, so try opening and closing the window a few times to make sure that it functions correctly and securely.

How do I install the new handle?

It’s not difficult to alter the handle on your uPVC windows. The process is easy. You only need a screwdriver and a bit of patience. First, make sure that the handle is not locked. Then remove any visible screws. You can also replace them with screw caps. Once the handle is removed, you need to make an note of the length of the spindle that extends from the back of the handle. This is vital as it will determine what kind of handle you will need to buy.

Espagnolette handles on uPVC are the most well-known type of handle. The spindle passes through the handle to operate the locking mechanism within the frame of the window. The handle releases the latch and allows the window to open. In regular use and over time, upvc window Handle replacement handles made of espagnolette can become damaged.

Cadenza handles are a form of uPVC handle that is typically used in tilt and turn windows. They feature a protruding blade that operates a multipoint locking mechanism within the window. They are usually more secure than handles made of espagnolette because they can only be opened from the inside. They can be replaced using the same method as you would for espagnolette handles however, ensure that the new handle is angled and not flat.

Once you have decided on the correct handle to purchase, you can simply place the new handle with the existing screw holes and then screw it into place. After that, you can put the screws on and test your new handle. This is accomplished by moving the handle from the locked to the unlocked position and then back to the locked position a few times. It may be worth contacting an expert to see if you can resolve any problems. They are often able to advise you on the best approach to solve the issue in a quick and efficient way.